How To Fix Solar Lights That Won¡¯t Turn On
When your solar lights were brand new, they seemed like a great idea. Installation was a breeze, and you can easily move them around the yard since they are not connected to an electrical cord. However, you might not feel the same once you start experiencing a few quirks along the way. You¡¯ll probably find them less reliable, but the good news is that there is a fix even for the biggest problem your solar lights have presented.
Now that you know the possible cause of your solar lights not working let¡¯s take a look at ways to fix them so they can start functioning well again.Place The Solar Lights Where They Can Receive Sufficient Sunlight
Your solar panels will not absorb enough sunlight to recharge the batteries if they are in a shaded area. You need to relocate them to somewhere where they can receive direct sunlight for a couple of hours. In case there is an overgrowth of grass or bush surrounding the solar lamp, you can go with the option of trimming it short. Ensure that you have left no room for shadows. By doing this, the solar lights will get enough sun for the batteries to remain fully recharged.
Replace The Batteries
Batteries are essential components in solar lights, and you need to replace them after approximately three years. Mostly, users forget to check until solar lights are no longer working due to old batteries.
How long have you used your current batteries? If it¡¯s beyond three years, replace them with more modern products like NiMH and Li-ion batteries. They¡¯re great batteries, and they will serve you for several years before they lose their charging ability.
Change The Sensor
If your solar light sensor is faulty, you can always replace it as long as the rest of the lamp is in good condition. The good thing is that some manufacturers offer replacements, so you can reach out to the manufacturer of your solar lights to repair the sensors. This solution is not only cost-effective but also a simple fix for your solar light to back up and start performing.
Regularly Clean The Solar Panels
After installing solar lights, you need to ensure the panels are always clean as they tend to get dirty with time. Dust or any debris on the panels reduces the lighting time and the charging process, and that¡¯s why it¡¯s a great idea to clean them now and then. You can use a hose and soapy water, which is the most effective way. A clean solar panel supplies the batteries with enough sunlight. Not to mention, your home will become more beautiful.
Ensure There Is No Water Inside The Solar Lamp
Although outdoor solar lights are built to withstand water and rain, they can be overwhelmed, especially during heavy rains, and end up not functioning. If the solar light is filled with water, disassemble it as needed and dry off all the accessories, paying close attention to the sensor. After thoroughly doing that, carefully put it back together, and test the solar light in a dark room to see if it will work. If it does, water was the cause of the damage.
Relocate Your Solar Light Away From Other Light Sources
Do you have another artificial light next to your solar lamp? This could be the cause of failure. Switch the lamp to a different area and see if that fixes your problem. Place where it can receive adequate sunlight during the day and no intervention from other lights at night.
Solar lights are environment-friendly, cost-effective, and a great way to light up your backyard or garden. Nevertheless, a couple of reasons can cause them to stop working, including dead batteries and dirty solar panels.
This article contains excellent information about how solar lights work, and we¡¯re sure you¡¯ll find it useful. If yours is not functioning, you now know what could have caused the problem and how to fix it.